4 ml Polyethylene Vials with Unlined Polypropylene Screw Caps

4 ml Polyethylene Replacement Vials, Unlined Caps
Back to List
$202.00
SKU: PERV 04-240-11
Qty:

Our cost-effective 4 ml Polyethylene Vials with Unlined Screw Caps are suitable for high throughput dry grinding of resilient tissue (e.g., most small seeds, animal tissue). 

NOTE:  Polyethylene Vials are relatively pliable compared to Polycarbonate Vials and are not as effective when used on large, difficult-to-grind samples (e.g., corn kernels).  Polycarbonate Vials are also preferred for cryogenic grinding.

Each 4 ml Polyethylene Vial has a working volume of 4 ml and is suitable for homogenizing up to 200 mg of sample.  Recommended for use with 3/8” Stainless Steel Grinding Balls and 5/16” Stainless Steel Grinding Balls (not included).

Sold in cases of two hundred forty (240) 4 ml Polyethylene Vials with Unlined Polypropylene Screw Caps.

For more specific information regarding sample processing, please consult the Selection of Grinding Vials for Sample Processing and Bead Beating: A Primer.

Not sure where to start? Check out our application table.

Related Products

24 Well Polyethylene Vial Sets with Unlined Caps (case)

3/8” Stainless Steel Grinding Balls

5/16” Stainless Steel Grinding Balls

Our 4 ml Polyethylene Vials with Unlined Polypropylene Screw Caps

Our cost-effective 4 ml Polyethylene Vials with Unlined Screw Caps are suitable for high throughput dry grinding of resilient tissue (e.g., most small seeds, animal tissue). 

NOTE:  Polyethylene Vials are relatively pliable compared to Polycarbonate Vials and are not as effective when used on large, difficult-to-grind samples (e.g., corn kernels).  Polycarbonate Vials are also preferred for cryogenic grinding.

Each 4 ml Polyethylene Vial has a working volume of 4 ml and is suitable for homogenizing up to 200 mg of sample.  Recommended for use with 3/8” Stainless Steel Grinding Balls and 5/16” Stainless Steel Grinding Balls (not included).

Sold in cases of two hundred forty (240) 4 ml Polyethylene Vials with Unlined Polypropylene Screw Caps.

For more specific information regarding sample processing, please consult the Selection of Grinding Vials for Sample Processing and Bead Beating: A Primer.

Not sure where to start? Check out our application table.

Related Products

24 Well Polyethylene Vial Sets with Unlined Caps (case)

3/8” Stainless Steel Grinding Balls

5/16” Stainless Steel Grinding Balls

Products

Information