4 ml Polycarbonate Vials with Lined Polypropylene Screw Caps

4 ml polycarbonate replacement vials, with lined caps
Back to List
$237.00
SKU: PCRV 04-240-10
Qty:

Our 4 ml Polycarbonate Vials with Lined Polypropylene Screw Caps are designed for high throughput homogenization of resilient materials, such as kernels, seeds and animal tissues, using solvents or buffers.  Unlike softer plastics, polycarbonate retains its rigidity and strength during bead beating.  Extremely durable, polycarbonate vials can be submersed in liquid nitrogen and immediately used for cryogenic grinding. (NOTE: Vials should be placed in Cryo-Blocks for cryogenic grinding).  Solvent-resistant polyethylene-lined Polypropylene Screw Caps are recommended when wet grinding using solvents or buffers.   

Each vial has a working volume of 4 ml and is suitable for homogenizing up to 200 mg of sample.  Recommended for use with 3/8” Stainless Steel Grinding Balls and 5/16” Stainless Steel Grinding Balls (not included).

Sold in cases of two hundred forty (240) 4 ml Polycarbonate Vials with Lined Polypropylene Screw Caps.

For more specific information regarding sample processing, please consult the Selection of Grinding Vials for Sample Processing and Bead Beating: A Primer.

Not sure where to start? Check out our application table.

Related Products

24 Well Polycarbonate Vial Sets with Lined Caps (case)

3/8” Stainless Steel Grinding Balls

5/16” Stainless Steel Grinding Balls

Citations
 
Paupy, C.; Ollomo, B.; Kamgang, B.; Moutailler, S.; Rousset, D.; Demanou, M.; Hervé, J.-P.; Leroy, E.; Simard, F. Comparative Role of Aedes Albopictus and Aedes Aegypti in the Emergence of Dengue and Chikungunya in Central Africa. Vector-Borne and Zoonotic Diseases 2010, 10 (3), 259–266. https://doi.org/10.1089/vbz.2009.0005.

 

 

 

Our 4 ml Polycarbonate Vials with Lined Polypropylene Screw Caps are designed for high throughput homogenization of resilient materials, such as kernels, seeds and animal tissues, using solvents or buffers.  Unlike softer plastics, polycarbonate retains its rigidity and strength during bead beating.  Extremely durable, polycarbonate vials can be submersed in liquid nitrogen and immediately used for cryogenic grinding. (NOTE: Vials should be placed in Cryo-Blocks for cryogenic grinding).  Solvent-resistant polyethylene-lined Polypropylene Screw Caps are recommended when wet grinding using solvents or buffers.   

Each vial has a working volume of 4 ml and is suitable for homogenizing up to 200 mg of sample.  Recommended for use with 3/8” Stainless Steel Grinding Balls and 5/16” Stainless Steel Grinding Balls (not included).

Sold in cases of two hundred forty (240) 4 ml Polycarbonate Vials with Lined Polypropylene Screw Caps.

For more specific information regarding sample processing, please consult the Selection of Grinding Vials for Sample Processing and Bead Beating: A Primer.

Not sure where to start? Check out our application table.

Related Products

24 Well Polycarbonate Vial Sets with Lined Caps (case)

3/8” Stainless Steel Grinding Balls

5/16” Stainless Steel Grinding Balls

Citations
 
Paupy, C.; Ollomo, B.; Kamgang, B.; Moutailler, S.; Rousset, D.; Demanou, M.; Hervé, J.-P.; Leroy, E.; Simard, F. Comparative Role of Aedes Albopictus and Aedes Aegypti in the Emergence of Dengue and Chikungunya in Central Africa. Vector-Borne and Zoonotic Diseases 2010, 10 (3), 259–266. https://doi.org/10.1089/vbz.2009.0005.

 

 

 

Products

Information